build: v4 is the default build -- every kernel boots v4; acceptance is v4 on three ISAs and the 32-bit build

Captain Bob, 2026-10-14: "v4 is the default build", "no, qemu to v4 too ... we are effectively trying to retire v3", "the 32 bit build needs to go into the acceptance test too", "i don't care about v3". - STARFORTH_V4 defaults on (Kconfig default y) and V4_DEFAULT=1 everywhere: every kernel carries v4 and v3 and boots v4; system=v3 boots v3; STARFORTH_V4=0 builds v3 alone. Board images write system=v4. - Acceptance (CLAUDE.md): the three ISAs as built (v4, POST passed, V4_SYSTEM dict_hash equal) and make -C v4 test-32. v3 is not part of it. Acceptance run: amd64, aarch64, riscv64 -- PARITY:V4_POST 538/538, dict_hash=0xe5a57f3eb72ff94a on all three, no unknown word; test-32: 30 suites, 0 failures. The SER5 image under OVMF boots v4 as built, v3 after the one-word edit. README, BRINGUP, FABRIC-3 XLIII, the register updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-14 17:21:13 -04:00
parent 7bc658bb83
commit 79db0e8d88
17 changed files with 9585 additions and 37 deletions
@@ -0,0 +1,120 @@
+[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;042;160t[2J[001;001H[2J[001;001H[8;056;240t[2J[001;001HBdsDxe: loading Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
+BdsDxe: starting Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
+[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
+Loading kernel from ESP...
+[CKPT 001] Entered efi_main - ConOut live
+RAW SERIAL UP
+[CKPT 002] Serial (COM1) initialized
+Monolithic build - kernel linked directly
+Collecting boot information...
+CmdLine: from starforth.cfg
+CmdLine: parsed OK
+[CKPT 004] Command line parsed
+[CKPT 005] Kernel stack allocation decided
+[CKPT 006] Boot info collected (ACPI table located)
+GOP: linear framebuffer found
+[CKPT 007] GOP: linear framebuffer found
+[CKPT 008] About to enter ExitBootServices retry loop
+EBS...
+EBS OK
+Calling kernel_main (monolithic)...
+
+
+   _____ _             _  __                    _ 
+  / ____| |           | |/ /                   | |
+ | (___ | |_ __ _ _ __| ' / ___ _ __ _ __   ___| |
+  \___ \| __/ _` | '__|  < / _ \ '__| '_ \ / _ \ |
+  ____) | || (_| | |  | . \  __/ |  | | | |  __/ |
+ |_____/ \__\__,_|_|  |_|\_\___|_|  |_| |_|\___|_|
+
+LithosAnanke v2.1.0 amd64
+Architecture: amd64
+Build: Oct 14 2026 16:59:11
+
+UEFI BootServices: EXITED
+Console: serial line is a 16550 at port 0x00000000000003f8 (COM1, probed)
+
+=== StarKernel Boot Information ===
+Memory map entries: 115
+Total memory: 4095 MB
+Usable memory: 4036 MB
+===================================
+
+PMM initialized.
+PMM statistics:
+  Total pages: 1034776
+  Free pages : 1033253
+  Used pages : 1523
+  Total MB   : 4042
+  Free  MB   : 4036
+  Used  MB   : 5
+
+VMM initialized (mapped RAM, CR3 switched)
+VMM initialized (mapped RAM, CR3 switched)
+VMM self-test: mapped OK at 0xffff800000000000
+VMM self-test complete.
+
+IDT installed.
+
+APIC: init...
+APIC: IA32_APIC_BASE MSR=0x00000000fee00900
+APIC: stale-ISR drain: 0 EOI(s) issued
+APIC: initialized (xAPIC MMIO, TPR=0, SIVR=0x1FF, EOI-clear)
+APIC: init done
+
+I/O APIC: init...
+I/O APIC: base=0xfec00000, gsi_base=0, overrides=5
+  override: source=00 gsi=2 flags=0x0000
+  override: source=05 gsi=5 flags=0x000d
+  override: source=09 gsi=9 flags=0x000d
+  override: source=0a gsi=10 flags=0x000d
+  override: source=0b gsi=11 flags=0x000d
+i8042: keyboard ACKed enable-scanning
+i8042: IRQ1 enabled in controller config byte
+I/O APIC: keyboard IRQ1 routed (masked)
+
+Timer: init...
+Timer: init start
+Timer: PM_TMR_BLK discovered from FADT at port 1544
+Timer: VM mode detected (hypervisor present).
+Timer: HPET calibration disabled (VM-exit MMIO would poison timing).
+Timer: WARNING: invariant TSC not present under hypervisor.
+Timer:          continuing in RELATIVE mode (no determinism guarantees).
+Timer: RDTSCP not present; using RDTSC (less serialized).
+Timer: CPUID frequency unavailable; trying PM Timer...
+Timer: trust=1 (0=NONE,1=REL,2=ABS), TSC=2107629803 Hz
+Timer: init done
+
+Kernel heap initialized.
+Heap statistics:
+  Total bytes: 2147483608
+  Free  bytes: 2147483608
+  Used  bytes: 0
+  Peak  bytes: 0
+  Heap base addr: 4294967296
+  Heap end  addr: 6442450944
+
+Heartbeat: init...
+APIC Timer: calibrating...
+APIC Timer: apic_hz=1010467601, tick_hz=100, initial_count=10104676
+APIC Timer: configured (masked, ready to start)
+Heartbeat: init done
+Kernel initialization complete.
+Boot successful!
+
+System: StarForth v4 (system=v4)
+StarForth v4: one host node, the F18-derived engine
+V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
+PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
+V4: capsule v4:forth79.4th signature: missing (unsigned)
+PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
+PARITY:V4_POST tests=538 pass=538 fail=0
+PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
+PARITY:OK
+POST: PASSED
+[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
+PCI: init...
+PCI: ECAM mapped (amd64)
+virtio-blk: no device on PCI bus 0
+Artemis: no virtio-blk disk
+ok>