build: v4 is the default build -- every kernel boots v4; acceptance is v4 on three ISAs and the 32-bit build
Captain Bob, 2026-10-14: "v4 is the default build", "no, qemu to v4 too ... we are effectively trying to retire v3", "the 32 bit build needs to go into the acceptance test too", "i don't care about v3". - STARFORTH_V4 defaults on (Kconfig default y) and V4_DEFAULT=1 everywhere: every kernel carries v4 and v3 and boots v4; system=v3 boots v3; STARFORTH_V4=0 builds v3 alone. Board images write system=v4. - Acceptance (CLAUDE.md): the three ISAs as built (v4, POST passed, V4_SYSTEM dict_hash equal) and make -C v4 test-32. v3 is not part of it. Acceptance run: amd64, aarch64, riscv64 -- PARITY:V4_POST 538/538, dict_hash=0xe5a57f3eb72ff94a on all three, no unknown word; test-32: 30 suites, 0 failures. The SER5 image under OVMF boots v4 as built, v3 after the one-word edit. README, BRINGUP, FABRIC-3 XLIII, the register updated. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
rajames
co-authored by
Claude Opus 5.5
Claude Opus 5.5
parent
7bc658bb83
commit
79db0e8d88
+19
-3
@@ -305,12 +305,23 @@ architectures in QEMU and capturing the serial log. There is no other test.
|
||||
The vendored hosted `make` build (above) is NEVER used to validate kernel changes.
|
||||
|
||||
```bash
|
||||
# Run in this exact order for every kernel change:
|
||||
# Run in this exact order for every kernel change. v4 is the default (2026-10-14):
|
||||
make -f kernel/Makefile ARCH=amd64 clean qemu
|
||||
make -f kernel/Makefile ARCH=aarch64 clean qemu
|
||||
make -f kernel/Makefile ARCH=riscv64 clean qemu
|
||||
# ...and the 32-bit build -- v4 with 32-bit cells, the F18/Zynq (FPGA) case: its nucleus
|
||||
# image and every v4 test at that width (no QEMU; not a substitute for the boots above):
|
||||
make -C v4 test-32
|
||||
```
|
||||
|
||||
**v4 is the default build (Captain Bob, 2026-10-14: "v4 is the default build ... no, qemu to v4
|
||||
too ... we are effectively trying to retire v3").** Every kernel build carries v4 and v3 and
|
||||
boots v4; `system=v3` in the boot arguments (`KERNEL_ARGS` for QEMU, `starforth.cfg` /
|
||||
`cmdline.txt` on a board's medium) boots v3. `STARFORTH_V4=0` builds v3 alone. The boot prints
|
||||
which system runs and why ("System: ..."). See `boards/BRINGUP.md` A6, `FABRIC-3.md` §XLIII.
|
||||
**v3 is not part of acceptance** (Captain Bob, 2026-10-14: "i don't care about v3"). It is still
|
||||
in the tree and `system=v3` still boots it, but nothing is accepted or refused on its account.
|
||||
|
||||
**QEMU rule — non-negotiable:** Only ONE QEMU instance may run at a time, always in the
|
||||
foreground (never backgrounded). All three instances use `accel=tcg` (software emulation);
|
||||
concurrent runs compete for host CPU and corrupt the timing signal the DoE measures.
|
||||
@@ -330,8 +341,13 @@ audit artifacts — they are committed to the repo. Do not delete them. There is
|
||||
timestamped convention (self-documented via its own README); not a contradiction, just a
|
||||
second, less-structured log location.
|
||||
|
||||
Do not claim a change is accepted until all three architectures have booted
|
||||
to `zuse)ok>` and their logs are present in `logs/`.
|
||||
Do not claim a change is accepted until all three architectures have booted, and their logs are
|
||||
present in `logs/`:
|
||||
- **as built (v4)** to `ok> `, with `PARITY:V4_POST tests=538 pass=538 fail=0` (the count
|
||||
grows with v4's POST) and `POST: PASSED`, and `PARITY:V4_SYSTEM ... dict_hash=` equal across
|
||||
the three;
|
||||
- **the 32-bit build** (Captain Bob, 2026-10-14: "the 32 bit build needs to go into the
|
||||
acceptance test too"): `make -C v4 test-32` passes -- every test, `0 failures`.
|
||||
|
||||
### CI
|
||||
|
||||
|
||||
+9
-7
@@ -14,15 +14,17 @@ config STARFORTH_ENABLE_VM
|
||||
block in kernel/Makefile, not just a handful of -D flags.
|
||||
|
||||
config STARFORTH_V4
|
||||
bool "Boot StarForth v4, the F18-derived engine, at a single prompt (STARFORTH_V4)"
|
||||
default n
|
||||
bool "Build StarForth v4, the F18-derived engine, in -- and boot it (STARFORTH_V4)"
|
||||
default y
|
||||
help
|
||||
Instead of the v3 VM and its fleet, the kernel starts one StarForth
|
||||
v4 host node after the M0-M6 hardware milestones: the golden model
|
||||
The kernel carries StarForth v4 as well as v3 and boots v4: one
|
||||
host node, after the M0-M6 hardware milestones, of the golden model
|
||||
of the 32-opcode engine (v4/src) running the capsule image built
|
||||
from v4/capsule, with its console on the kernel's serial console.
|
||||
It reaches v4's "ok> " prompt and stays there. The v3 VM is still
|
||||
compiled in but is not started. See docs/v4.0.0/DECOMPOSITION.md.
|
||||
from v4/capsule, with its console on the kernel's serial console;
|
||||
it reaches v4's "ok> " prompt. `system=v3` in the boot arguments
|
||||
boots the v3 VM and its fleet instead. On by default since
|
||||
2026-10-14: v3 is being retired. Off builds v3 alone. See
|
||||
docs/v4.0.0/DECOMPOSITION.md and boards/BRINGUP.md A6.
|
||||
|
||||
config PARITY_MODE
|
||||
bool "Deterministic parity harness mode (PARITY_MODE)"
|
||||
|
||||
@@ -98,15 +98,15 @@ boot_image:
|
||||
echo " $(call board_field,$(TARGET),BOARD_DESC)"; \
|
||||
exit 1; \
|
||||
fi
|
||||
@# Both systems in one image, v3 unless the boot arguments say system=v4
|
||||
@# (boards/BRINGUP.md A6, ruled 2026-10-14). A clean build every time: the
|
||||
@# Both systems in one image, v4 unless the boot arguments say system=v3
|
||||
@# (boards/BRINGUP.md A6, ruled 2026-10-14; v4 the default, same day). A clean build every time: the
|
||||
@# kernel objects are shared with `make qemu`, and make does not see a
|
||||
@# change of compile flags -- an image could otherwise carry objects built
|
||||
@# without v4, or without the bring-up console.
|
||||
@$(SUBMAKE) -f kernel/Makefile ARCH=$(call board_arch,$(TARGET)) TARGET=kernel clean
|
||||
@$(SUBMAKE) -f kernel/Makefile \
|
||||
BOARD=$(BOARD_DIR) ARCH=$(call board_arch,$(TARGET)) TARGET=kernel \
|
||||
STARFORTH_V4=1 V4_DEFAULT=0 boot_image
|
||||
STARFORTH_V4=1 V4_DEFAULT=1 boot_image
|
||||
@# Its SBOM, and the source tree's, are part of the build (2026-10-14).
|
||||
@$(SUBMAKE) sbom-board TARGET=$(TARGET)
|
||||
@$(SUBMAKE) sbom
|
||||
|
||||
@@ -21,7 +21,8 @@ StarForth v4 moves the engine onto a 32-instruction core derived from Chuck Moor
|
||||
FORTH-79 is recomposed on the F18 engine and stored as a capsule; the StarshipOS-specific
|
||||
vocabulary gets the same treatment. v3 remains the reference system until v4 meets its
|
||||
acceptance criteria (`docs/v4.0.0/JUSTIFICATION.md` §16). **Both run on bare metal now:** every
|
||||
board image carries v3 and v4, and one word in its boot configuration chooses (see below).
|
||||
board image carries v4 and v3, boots v4 as built, and one word in its boot configuration
|
||||
chooses (see below).
|
||||
|
||||
---
|
||||
|
||||
@@ -36,8 +37,10 @@ board image carries v3 and v4, and one word in its boot configuration chooses (s
|
||||
| M9 | Block storage — Artemis's disk on virtio-blk; identity thumbdrives on USB mass storage | ✅ In QEMU · real disks: no driver yet (`boards/BRINGUP.md` A4) |
|
||||
| Bare metal | SER5 (amd64), Raspberry Pi 5 (aarch64), Milk-V Mars (riscv64); Zynq-7020 (ARMv7) not yet ported | Images build; first boots on the bench — `boards/BRINGUP.md` |
|
||||
|
||||
POST at boot, on all three ISAs: **1052 tests**, parity hash verified —
|
||||
`PARITY:M7.1a word_count=526 hash=0x82f4ae7cb2e2d424`. The v4 system's POST: 538 tests.
|
||||
**v4 is the default build, and v3 is being retired**: every kernel boots v4 unless its boot
|
||||
arguments say `system=v3`. POST at boot, on all three ISAs: v4 — **538 tests**,
|
||||
`PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a`; v3 — **1052 tests**,
|
||||
`PARITY:M7.1a word_count=526 hash=0x82f4ae7cb2e2d424`.
|
||||
|
||||
### What's live
|
||||
|
||||
@@ -72,8 +75,8 @@ make boot_image TARGET=RASPI # Raspberry Pi 5 -- FAT, config.txt + kernel_2
|
||||
make boot_image TARGET=MILKV # Milk-V Mars -- GPT/ESP, BOOTRISCV64.EFI (U-Boot bootefi)
|
||||
make boards # list boards (the Zynq-7020 has no ARMv7 port yet)
|
||||
|
||||
# Each image carries v3 and v4. As built it boots v3; to boot v4, change the one word
|
||||
# system=v3 -> system=v4
|
||||
# Each image carries v4 and v3. As built it boots v4; to boot v3, change the one word
|
||||
# system=v4 -> system=v3
|
||||
# in starforth.cfg on the SER5's stick or the Mars's card, or cmdline.txt on the Pi 5's card.
|
||||
|
||||
# The same TARGET drives all, docs and clean (make help)
|
||||
@@ -81,11 +84,11 @@ make # every board with a kernel port + hosted v3 +
|
||||
make docs # build/docs/LithosAnanke.pdf (LaTeX master: docs/book/main.tex)
|
||||
make clean TARGET=RASPI # that board's outputs and build/aarch64/kernel
|
||||
|
||||
# The kernel in QEMU (OVMF / AAVMF / EDK2), one architecture at a time
|
||||
# The kernel in QEMU (OVMF / AAVMF / EDK2), one architecture at a time -- boots v4
|
||||
make -f kernel/Makefile ARCH=amd64 clean qemu
|
||||
make -f kernel/Makefile ARCH=aarch64 clean qemu
|
||||
make -f kernel/Makefile ARCH=riscv64 clean qemu
|
||||
make -f kernel/Makefile ARCH=amd64 STARFORTH_V4=1 clean qemu # the v4 system
|
||||
make -f kernel/Makefile ARCH=amd64 KERNEL_ARGS=system=v3 clean qemu # v3, while it remains
|
||||
|
||||
# The Pi 5's native boot path, rehearsed on QEMU's virt machine at EL2
|
||||
make -f kernel/Makefile ARCH=aarch64 RPI5_NATIVE_BASE=0x40080000 rpi5-rehearsal
|
||||
|
||||
+3
-3
@@ -28,7 +28,7 @@ None has been fixed: each needs your word.
|
||||
| A3 | **Fixed 2026-10-14.** A USB boot-protocol keyboard is driven (xHCI interrupt endpoint, `SET_PROTOCOL(boot)`), its reports become the same key events as the PS/2 and virtio keyboards, and the console treats a full keyboard as one: Caps Lock and Num Lock as toggles shown on the keyboard's lights, the keypad as digits or navigation, the arrows and navigation block mapped (the line editor itself still has no cursor movement). While a USB keyboard runs, the console services its reports every timer tick. | `kernel/src/usb/usb_kbd.c`, `kernel/src/usb/xhci.c`, `kernel/src/repl.c`; `FABRIC-3.md` XLI | Rehearsed in QEMU on all three ISAs; on amd64 with the USB keyboard the only keyboard. Limits: a keyboard whose first interface is not the keyboard is not used; no key repeat. Several keyboards, on any controllers, each its own. |
|
||||
| A4 | **The only disk driver is virtio.** | `kernel/src/virtio/virtio_blk.c`; `kernel_main.c:493` | On hardware Artemis finds no disk ("Artemis: no virtio-blk disk"). What the fleet then does has not been tried even in QEMU: see step 3.3. |
|
||||
| A5 | **Entropy:** RDRAND on amd64 only. aarch64 and riscv64 have virtio-rng alone. | `kernel/src/rng/rng.c` | Pi 5 and Mars print the "no entropy backend available" warning; anything that needs random bytes is refused. Minting needs them. |
|
||||
| A6 | **Fixed 2026-10-14.** Every board image carries both systems, v3 and v4, and the boot arguments choose: `system=v3` (as built) or `system=v4` -- one word in `starforth.cfg` on the SER5's and the Mars's stick or card, in `cmdline.txt` on the Pi 5's card. No rebuild to switch. | root `Makefile`, `kernel/Makefile`, `kernel/src/kernel_main.c`, `kernel/src/boot/cmdline.c`; `FABRIC-3.md` XLIII | The SER5 image itself, booted under OVMF: v3 as built, v4 after the one-word edit. The boot says which system runs and why ("System: ..."). |
|
||||
| A6 | **Fixed 2026-10-14.** Every board image carries both systems, v3 and v4, and the boot arguments choose: `system=v4` (as built: v4 is the default) or `system=v3` -- one word in `starforth.cfg` on the SER5's and the Mars's stick or card, in `cmdline.txt` on the Pi 5's card. No rebuild to switch. | root `Makefile`, `kernel/Makefile`, `kernel/src/kernel_main.c`, `kernel/src/boot/cmdline.c`; `FABRIC-3.md` XLIII | The SER5 image itself, booted under OVMF: v3 as built, v4 after the one-word edit. The boot says which system runs and why ("System: ..."). |
|
||||
|
||||
### 1.2 SER5
|
||||
|
||||
@@ -135,8 +135,8 @@ make boot_image TARGET=MILKV EMERGENCY_CONSOLE_ENABLED=1
|
||||
- [ ] ~~`make clean TARGET=<board>` first.~~ `make boot_image` now cleans its ISA's kernel
|
||||
objects itself (2026-10-14): make does not see a change of compile flags, and an image
|
||||
built over old objects booted headless (2026-10-13) or would have lacked v4.
|
||||
- [ ] To boot v4 instead of v3: change `system=v3` to `system=v4` in `starforth.cfg` (SER5,
|
||||
Mars) or `cmdline.txt` (Pi 5) on the medium. The boot prints "System: ..." with the choice.
|
||||
- [ ] The images boot v4. To boot v3 instead: change `system=v4` to `system=v3` in
|
||||
`starforth.cfg` (SER5, Mars) or `cmdline.txt` (Pi 5) on the medium. The boot prints "System: ..." with the choice.
|
||||
- [ ] Each ends with its image in `build/boards/<board>/`. Record `sha256sum` of each.
|
||||
- [ ] Confirm the switch took: the image booted in QEMU (3.2) shows a prompt with no
|
||||
thumbdrive attached. After a clean build it does (tried on `MILKV`).
|
||||
|
||||
@@ -41,9 +41,10 @@ document is superseded or a claim corrected.
|
||||
| The log ring's growth is "safe regardless of wrap state" | **it was not**; fixed | 2026-10-14 | `fabric/FABRIC-3.md` §XXXVIII |
|
||||
| The Pi 5's GIC is under `/axi` with two-cell addresses; its framebuffer address needs `& 0x3FFFFFFF` | **under `/soc`, one cell**, read through `ranges`; the address **goes through `dma-ranges`** | 2026-10-14 | `fabric/FABRIC-3.md` §XXXIX |
|
||||
| The old elevation path passed a raw cross-VM address | **it copied text** (the narrower real gap was a `"` in a name) | 2026-09-22 | `fabric/FABRIC-3.7.md` (its own correction) |
|
||||
| Kernel builds boot v3 (v4 only with `STARFORTH_V4=1`, then v3 not at all; board images v3 unless `system=v4`) | **every build carries both and boots v4** unless `system=v3` -- v3 is being retired | 2026-10-14 | `fabric/FABRIC-3.md` XLIII (revised) |
|
||||
| `.claude/ARTEMIS.md`, `HERMES.md`, `TRIPOD.md`, `CONSOLE.md` describe the system | **frozen as record**, superseded by FABRIC-3.5/3.6 | 2026-09-22 | `.claude/CLAUDE.md` (top) |
|
||||
|
||||
**Resolved 2026-10-14:** the top-level `README.md` was titled "LithosAnanke v2.0.1" (the SER5
|
||||
hardware line's version) while the kernel is 2.1.0; Captain Bob ruled it rewritten -- it now
|
||||
describes the system as it is (Tripod Hera/Artemis/Hestia, kernel-Hermes, 1052-test POST, both
|
||||
systems on every board image).
|
||||
systems on every board image, v4 the default).
|
||||
|
||||
@@ -5887,3 +5887,13 @@ it, v4. The Pi 5 and Mars images: built, their `cmdline.txt` / `starforth.cfg` r
|
||||
image, both systems found in their kernels; not booted (no QEMU model for either). Standard
|
||||
acceptance, all three ISAs: unchanged (`-150651`, `-150801`, `-151007`).
|
||||
|
||||
**XLIII, revised the same day -- v4 is the default build.** Captain Bob, 2026-10-14: "v4 is the
|
||||
default build", then "no, qemu to v4 too ... we are effectively trying to retire v3". Every kernel
|
||||
build now carries v4 and v3 and boots **v4**: `STARFORTH_V4` defaults on (Kconfig `default y`),
|
||||
`V4_DEFAULT=1` everywhere, and the board images write `system=v4` into `starforth.cfg` /
|
||||
`cmdline.txt`. `system=v3` is the one word that boots v3; `STARFORTH_V4=0` builds v3 alone. The
|
||||
acceptance rule (`.claude/CLAUDE.md`) became: the three ISAs as built (v4), and the 32-bit build,
|
||||
`make -C v4 test-32` ("the 32 bit build needs to go into the acceptance test too"). v3 is not part
|
||||
of it ("i don't care about v3"); it stays in the tree, `system=v3` still boots it. Verified: the three images rebuilt with `system=v4` in their boot files; the
|
||||
SER5 image under OVMF as built boots v4, and after changing the word, v3 (`logs/20261014-ser5-image/`).
|
||||
|
||||
|
||||
+14
-11
@@ -60,8 +60,10 @@ $(eval $(call kconfig_bool,PARITY_MODE,0))
|
||||
# StarForth VM integration (default: enabled)
|
||||
$(eval $(call kconfig_bool,STARFORTH_ENABLE_VM,1))
|
||||
|
||||
# StarForth v4 at a single prompt in place of the v3 VM (default: off)
|
||||
$(eval $(call kconfig_bool,STARFORTH_V4,0))
|
||||
# StarForth v4 built in (default: on, 2026-10-14 -- v3 is being retired). With
|
||||
# it the kernel carries v4 and v3 and boots v4 unless the boot arguments say
|
||||
# system=v3 (V4_DEFAULT below). STARFORTH_V4=0 builds v3 alone.
|
||||
$(eval $(call kconfig_bool,STARFORTH_V4,1))
|
||||
|
||||
# Monolithic build — loader + kernel compiled together (default: enabled)
|
||||
MONOLITHIC ?= 1
|
||||
@@ -621,9 +623,10 @@ endif
|
||||
# same file for all three.
|
||||
# ------------------------------------------------------------------------------
|
||||
# V4_DEFAULT: with v4 built in, whether it runs when the boot arguments
|
||||
# name no system (A6, 2026-10-14). 1 for a plain STARFORTH_V4=1 build, as
|
||||
# before; board images build with both and V4_DEFAULT=0 -- v3 unless
|
||||
# `system=v4` (root Makefile, boot_image).
|
||||
# name no system (A6, 2026-10-14). 1 -- v4 -- for every build: QEMU and the
|
||||
# board images alike (Captain Bob, 2026-10-14: "v4 is the default build ...
|
||||
# we are effectively trying to retire v3"); the board images also write
|
||||
# `system=v4` into their boot arguments. `system=v3` boots v3.
|
||||
V4_DEFAULT ?= 1
|
||||
ifeq ($(STARFORTH_V4),1)
|
||||
V4_DEFS := -DSTARFORTH_V4=1 -DSK_V4_DEFAULT=$(V4_DEFAULT) -Iv4/include \
|
||||
@@ -1288,10 +1291,10 @@ else ifeq ($(BOARD_BOOT),uefi-esp)
|
||||
boot_image: all
|
||||
@mkdir -p $(BOARD_OUT)
|
||||
@printf 'FS0:\\EFI\\BOOT\\%s\r\n' "$(EFI_BOOTNAME)" > $(BOARD_OUT)/startup.nsh
|
||||
@# The boot arguments, always written: system=v3 first, so that which
|
||||
@# system runs is one word to change on the stick (A6); KERNEL_ARGS
|
||||
@# after it, and a later system= wins.
|
||||
@printf '%s\n' 'system=v3 $(KERNEL_ARGS)' > $(BOARD_OUT)/starforth.cfg
|
||||
@# The boot arguments, always written: system=v4 first -- v4 is the
|
||||
@# default -- so that which system runs is one word to change on the
|
||||
@# stick (A6); KERNEL_ARGS after it, and a later system= wins.
|
||||
@printf '%s\n' 'system=v4 $(KERNEL_ARGS)' > $(BOARD_OUT)/starforth.cfg
|
||||
@bash scripts/mkdiskimage.sh --out $(BOARD_OUT)/$(BOARD_IMAGE) --table gpt \
|
||||
--size-mib $(BOOT_IMAGE_SIZE_MIB) --label LITHOS \
|
||||
$(LOADER_EFI):/EFI/BOOT/$(EFI_BOOTNAME) \
|
||||
@@ -1311,8 +1314,8 @@ $(RPI5_DTB):
|
||||
boot_image: v3/include/version.h $(RPI5_NATIVE_IMG) $(RPI5_DTB)
|
||||
@mkdir -p $(BOARD_OUT)
|
||||
@# cmdline.txt, always: the firmware hands it to the kernel as the
|
||||
@# devicetree's bootargs. system=v3 first, one word to change (A6).
|
||||
@printf '%s\n' 'system=v3 $(KERNEL_ARGS)' > $(BOARD_OUT)/cmdline.txt
|
||||
@# devicetree's bootargs. system=v4 first, one word to change (A6).
|
||||
@printf '%s\n' 'system=v4 $(KERNEL_ARGS)' > $(BOARD_OUT)/cmdline.txt
|
||||
@bash scripts/mkdiskimage.sh --out $(BOARD_OUT)/$(BOARD_IMAGE) --table mbr \
|
||||
--size-mib $(BOOT_IMAGE_SIZE_MIB) --label LITHOS \
|
||||
boards/$(BOARD)/config.txt:/config.txt \
|
||||
|
||||
@@ -565,8 +565,8 @@ static void kernel_main_deep(BootInfo *boot_info) {
|
||||
* both systems, chosen at boot). A kernel built with STARFORTH_V4
|
||||
* carries v4 as well as v3; `system=v3` or `system=v4` among the boot
|
||||
* arguments (starforth.cfg on the ESP, cmdline.txt on the Pi 5) picks,
|
||||
* else the build's default (SK_V4_DEFAULT: on for a plain STARFORTH_V4
|
||||
* build, off for a board image). */
|
||||
* else the build's default (SK_V4_DEFAULT: on -- v4 -- for every build,
|
||||
* QEMU and board images alike, since 2026-10-14: v3 is being retired). */
|
||||
#ifdef STARFORTH_V4
|
||||
if (boot_info->args.system == KARGS_SYSTEM_V4 ||
|
||||
(boot_info->args.system == KARGS_SYSTEM_DEFAULT && SK_V4_DEFAULT)) {
|
||||
|
||||
@@ -0,0 +1,120 @@
|
||||
[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;042;160t[2J[001;001H[2J[001;001H[8;056;240t[2J[001;001HBdsDxe: loading Boot0002 "UEFI QEMU DVD-ROM QM00005 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0xFFFF,0x0)
|
||||
BdsDxe: starting Boot0002 "UEFI QEMU DVD-ROM QM00005 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x2,0xFFFF,0x0)
|
||||
[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
RAW SERIAL UP
|
||||
[CKPT 002] Serial (COM1) initialized
|
||||
Monolithic build - kernel linked directly
|
||||
Collecting boot information...
|
||||
CmdLine: parsed OK
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
GOP: linear framebuffer found
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
EBS...
|
||||
EBS OK
|
||||
Calling kernel_main (monolithic)...
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 amd64
|
||||
Architecture: amd64
|
||||
Build: Oct 14 2026 17:08:19
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a 16550 at port 0x00000000000003f8 (COM1, probed)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 131
|
||||
Total memory: 1023 MB
|
||||
Usable memory: 966 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 248727
|
||||
Free pages : 247204
|
||||
Used pages : 1523
|
||||
Total MB : 971
|
||||
Free MB : 965
|
||||
Used MB : 5
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
APIC: IA32_APIC_BASE MSR=0x00000000fee00900
|
||||
APIC: stale-ISR drain: 0 EOI(s) issued
|
||||
APIC: initialized (xAPIC MMIO, TPR=0, SIVR=0x1FF, EOI-clear)
|
||||
APIC: init done
|
||||
|
||||
I/O APIC: init...
|
||||
I/O APIC: base=0xfec00000, gsi_base=0, overrides=5
|
||||
override: source=00 gsi=2 flags=0x0000
|
||||
override: source=05 gsi=5 flags=0x000d
|
||||
override: source=09 gsi=9 flags=0x000d
|
||||
override: source=0a gsi=10 flags=0x000d
|
||||
override: source=0b gsi=11 flags=0x000d
|
||||
i8042: keyboard ACKed enable-scanning
|
||||
i8042: IRQ1 enabled in controller config byte
|
||||
I/O APIC: keyboard IRQ1 routed (masked)
|
||||
|
||||
Timer: init...
|
||||
Timer: init start
|
||||
Timer: PM_TMR_BLK discovered from FADT at port 1544
|
||||
Timer: VM mode detected (hypervisor present).
|
||||
Timer: HPET calibration disabled (VM-exit MMIO would poison timing).
|
||||
Timer: WARNING: invariant TSC not present under hypervisor.
|
||||
Timer: continuing in RELATIVE mode (no determinism guarantees).
|
||||
Timer: RDTSCP not present; using RDTSC (less serialized).
|
||||
Timer: CPUID frequency unavailable; trying PM Timer...
|
||||
Timer: trust=1 (0=NONE,1=REL,2=ABS), TSC=2097707300 Hz
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 536870872
|
||||
Free bytes: 536870872
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 24641536
|
||||
Heap end addr: 561512448
|
||||
|
||||
Heartbeat: init...
|
||||
APIC Timer: calibrating...
|
||||
APIC Timer: apic_hz=1011373400, tick_hz=100, initial_count=10113734
|
||||
APIC Timer: configured (masked, ready to start)
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (this build's default)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
PCI: ECAM mapped (amd64)
|
||||
virtio-blk: found device
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 85201914] blk: disk 'StarForth Volume' v2 LBN 3072..789009 (785938 user b
|
||||
Artemis: virtio-blk attached
|
||||
ok>
|
||||
@@ -0,0 +1,93 @@
|
||||
UEFI firmware (version 2025.11-3ubuntu7.3 built at 15:40:26 on Sep 23 2026)
|
||||
[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;031;100t[2J[001;001HBdsDxe: failed to load Boot0002 "UEFI Misc Device" from PciRoot(0x0)/Pci(0x2,0x0): Not Found
|
||||
BdsDxe: failed to load Boot0003 "UEFI QEMU QEMU USB HARDDRIVE 1-0000:00:04.0-1" from PciRoot(0x0)/Pci(0x4,0x0)/USB(0x0,0x0): Not Found
|
||||
BdsDxe: loading Boot0004 "UEFI Misc Device 2" from PciRoot(0x0)/Pci(0x6,0x0)
|
||||
BdsDxe: starting Boot0004 "UEFI Misc Device 2" from PciRoot(0x0)/Pci(0x6,0x0)
|
||||
[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
Collecting boot information...
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 aarch64
|
||||
Architecture: aarch64
|
||||
Build: Oct 14 2026 17:10:42
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a PL011 at 0x0000000009000000 (no devicetree: QEMU's)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 108
|
||||
Total memory: 4093 MB
|
||||
Usable memory: 4054 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 1039338
|
||||
Free pages : 1037927
|
||||
Used pages : 1411
|
||||
Total MB : 4059
|
||||
Free MB : 4054
|
||||
Used MB : 5
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
AArch64: running at EL1
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
PSCI: no DTB -- using HVC (QEMU virt-machine default)
|
||||
GICv2: no DTB GIC node -- using QEMU virt-machine defaults
|
||||
GICv2: distributor+CPU interface enabled, PPI 30
|
||||
APIC: init done
|
||||
|
||||
Timer: init...
|
||||
Timer: AArch64 generic timer initialised.
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 2147483608
|
||||
Free bytes: 2147483608
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 1207959552
|
||||
Heap end addr: 3355443200
|
||||
|
||||
Heartbeat: init...
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (this build's default)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
virtio-blk: found device
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 1475147] blk: disk 'StarForth Volume' v2 LBN 3072..789009 (785938 user b
|
||||
Artemis: virtio-blk attached
|
||||
ok>
|
||||
@@ -0,0 +1,163 @@
|
||||
|
||||
OpenSBI v1.8
|
||||
____ _____ ____ _____
|
||||
/ __ \ / ____| _ \_ _|
|
||||
| | | |_ __ ___ _ __ | (___ | |_) || |
|
||||
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
|
||||
| |__| | |_) | __/ | | |____) | |_) || |_
|
||||
\____/| .__/ \___|_| |_|_____/|____/_____|
|
||||
| |
|
||||
|_|
|
||||
|
||||
Platform Name : riscv-virtio,qemu
|
||||
Platform Features : medeleg
|
||||
Platform HART Count : 1
|
||||
Platform HART Protection : pmp
|
||||
Platform IPI Device : aclint-mswi
|
||||
Platform Timer Device : aclint-mtimer @ 10000000Hz
|
||||
Platform Console Device : uart8250
|
||||
Platform HSM Device : ---
|
||||
Platform PMU Device : ---
|
||||
Platform Reboot Device : syscon-reboot
|
||||
Platform Shutdown Device : syscon-poweroff
|
||||
Platform Suspend Device : ---
|
||||
Platform CPPC Device : ---
|
||||
Firmware Base : 0x80000000
|
||||
Firmware Size : 321 KB
|
||||
Firmware RW Offset : 0x40000
|
||||
Firmware RW Size : 65 KB
|
||||
Firmware Heap Offset : 0x47000
|
||||
Firmware Heap Size : 37 KB (total), 0 KB (reserved), 12 KB (used), 23 KB (free)
|
||||
Firmware Scratch Size : 4096 B (total), 1464 B (used), 2632 B (free)
|
||||
Runtime SBI Version : 3.0
|
||||
Standard SBI Extensions : ipi,pmu,srst,sse,hsm,rfnc,fwft,time,base,legacy,dbcn,dbtr
|
||||
Experimental SBI Extensions : none
|
||||
|
||||
Domain0 Name : root
|
||||
Domain0 Boot HART : 0
|
||||
Domain0 HARTs : 0*
|
||||
Domain0 Region00 : 0x0000000080040000-0x000000008005ffff M: (F,R,W) S/U: ()
|
||||
Domain0 Region01 : 0x0000000080000000-0x000000008003ffff M: (F,R,X) S/U: ()
|
||||
Domain0 Region02 : 0x0000000000100000-0x0000000000100fff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region03 : 0x0000000010000000-0x0000000010000fff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region04 : 0x0000000002000000-0x000000000200ffff M: (I,R,W) S/U: ()
|
||||
Domain0 Region05 : 0x000000000c400000-0x000000000c5fffff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region06 : 0x000000000c000000-0x000000000c3fffff M: (I,R,W) S/U: (R,W)
|
||||
Domain0 Region07 : 0x0000000000000000-0xffffffffffffffff M: () S/U: (R,W,X)
|
||||
Domain0 Next Address : 0x0000000020000000
|
||||
Domain0 Next Arg1 : 0x00000000bfe00000
|
||||
Domain0 Next Mode : S-mode
|
||||
Domain0 SysReset : yes
|
||||
Domain0 SysSuspend : yes
|
||||
|
||||
Boot HART ID : 0
|
||||
Boot HART Domain : root
|
||||
Boot HART Priv Version : v1.12
|
||||
Boot HART Base ISA : rv64imafdch
|
||||
Boot HART ISA Extensions : sstc,zicntr,zihpm,zicboz,zicbom,sdtrig,svadu
|
||||
Boot HART PMP Count : 16
|
||||
Boot HART PMP Granularity : 2 bits
|
||||
Boot HART PMP Address Bits : 54
|
||||
Boot HART MHPM Info : 16 (0x0007fff8)
|
||||
Boot HART Debug Triggers : 2 triggers
|
||||
Boot HART MIDELEG : 0x0000000000001666
|
||||
Boot HART MEDELEG : 0x0000000000f4b509
|
||||
[2J[004D[=3h[2J[009D[2J[004D[8;031;100t[2J[016DRISC-V EDK2 firmware version 2025.11-3ubuntu7.3
|
||||
Press ESCAPE within 5 seconds for boot options ERROR: C40000002:V03051002 I0 6D33944A-EC75-4855-A54D-809C75241F6C 83FFF850
|
||||
BdsDxe: failed to load Boot0001 "UEFI Misc Device" fr
|
||||
om PciRoot(0x0)/Pci(0x1,0x0): Not Found
|
||||
[2J[001;001H[=3h[2J[009DStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
Monolithic build - kernel linked directly
|
||||
Collecting boot information...
|
||||
CmdLine: parsed OK
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
GOP: linear framebuffer found
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
Calling kernel_main (monolithic)...
|
||||
riscv64 item 4.3.5a: satp state at kernel entry (before switch)
|
||||
satp.MODE = 0x000000000000000a
|
||||
satp.PPN = 0x00000000000bf868
|
||||
__kernel_start = 0x00000000bdc90070
|
||||
riscv64: satp cleared -- Bare mode, explicit (item 4.3.5a)
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 riscv64
|
||||
Architecture: riscv64
|
||||
Build: Oct 14 2026 17:13:57
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a 16550 at 0x0000000010000000 (no devicetree: QEMU's)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 100
|
||||
Total memory: 1020 MB
|
||||
Usable memory: 975 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 250258
|
||||
Free pages : 249606
|
||||
Used pages : 652
|
||||
Total MB : 977
|
||||
Free MB : 975
|
||||
Used MB : 2
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
PLIC: no DTB PLIC node -- using QEMU virt-machine default (base=0x0c000000)
|
||||
PLIC: init (S-mode context 1, threshold=0)
|
||||
APIC: init done
|
||||
|
||||
Timer: init...
|
||||
Timer: RISC-V time CSR @ 10000000 Hz (FALLBACK, no devicetree)
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 536870872
|
||||
Free bytes: 536870872
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 2214588416
|
||||
Heap end addr: 2751459328
|
||||
|
||||
Heartbeat: init...
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (this build's default)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
virtio-blk: found device
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 27552966] blk: disk 'StarForth Volume' v2 LBN 3072..789009 (785938 user b
|
||||
Artemis: virtio-blk attached
|
||||
ok>
|
||||
@@ -0,0 +1,120 @@
|
||||
[2J[001;001H[=3h[2J[001;001H[2J[001;001H[8;042;160t[2J[001;001H[2J[001;001H[8;056;240t[2J[001;001HBdsDxe: loading Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
|
||||
BdsDxe: starting Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1F,0x2)/Sata(0x0,0xFFFF,0x0)
|
||||
[2J[001;001H[=3h[2J[001;001HStarKernel UEFI Loader
|
||||
Loading kernel from ESP...
|
||||
[CKPT 001] Entered efi_main - ConOut live
|
||||
RAW SERIAL UP
|
||||
[CKPT 002] Serial (COM1) initialized
|
||||
Monolithic build - kernel linked directly
|
||||
Collecting boot information...
|
||||
CmdLine: from starforth.cfg
|
||||
CmdLine: parsed OK
|
||||
[CKPT 004] Command line parsed
|
||||
[CKPT 005] Kernel stack allocation decided
|
||||
[CKPT 006] Boot info collected (ACPI table located)
|
||||
GOP: linear framebuffer found
|
||||
[CKPT 007] GOP: linear framebuffer found
|
||||
[CKPT 008] About to enter ExitBootServices retry loop
|
||||
EBS...
|
||||
EBS OK
|
||||
Calling kernel_main (monolithic)...
|
||||
|
||||
|
||||
_____ _ _ __ _
|
||||
/ ____| | | |/ / | |
|
||||
| (___ | |_ __ _ _ __| ' / ___ _ __ _ __ ___| |
|
||||
\___ \| __/ _` | '__| < / _ \ '__| '_ \ / _ \ |
|
||||
____) | || (_| | | | . \ __/ | | | | | __/ |
|
||||
|_____/ \__\__,_|_| |_|\_\___|_| |_| |_|\___|_|
|
||||
|
||||
LithosAnanke v2.1.0 amd64
|
||||
Architecture: amd64
|
||||
Build: Oct 14 2026 16:59:11
|
||||
|
||||
UEFI BootServices: EXITED
|
||||
Console: serial line is a 16550 at port 0x00000000000003f8 (COM1, probed)
|
||||
|
||||
=== StarKernel Boot Information ===
|
||||
Memory map entries: 115
|
||||
Total memory: 4095 MB
|
||||
Usable memory: 4036 MB
|
||||
===================================
|
||||
|
||||
PMM initialized.
|
||||
PMM statistics:
|
||||
Total pages: 1034776
|
||||
Free pages : 1033253
|
||||
Used pages : 1523
|
||||
Total MB : 4042
|
||||
Free MB : 4036
|
||||
Used MB : 5
|
||||
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM initialized (mapped RAM, CR3 switched)
|
||||
VMM self-test: mapped OK at 0xffff800000000000
|
||||
VMM self-test complete.
|
||||
|
||||
IDT installed.
|
||||
|
||||
APIC: init...
|
||||
APIC: IA32_APIC_BASE MSR=0x00000000fee00900
|
||||
APIC: stale-ISR drain: 0 EOI(s) issued
|
||||
APIC: initialized (xAPIC MMIO, TPR=0, SIVR=0x1FF, EOI-clear)
|
||||
APIC: init done
|
||||
|
||||
I/O APIC: init...
|
||||
I/O APIC: base=0xfec00000, gsi_base=0, overrides=5
|
||||
override: source=00 gsi=2 flags=0x0000
|
||||
override: source=05 gsi=5 flags=0x000d
|
||||
override: source=09 gsi=9 flags=0x000d
|
||||
override: source=0a gsi=10 flags=0x000d
|
||||
override: source=0b gsi=11 flags=0x000d
|
||||
i8042: keyboard ACKed enable-scanning
|
||||
i8042: IRQ1 enabled in controller config byte
|
||||
I/O APIC: keyboard IRQ1 routed (masked)
|
||||
|
||||
Timer: init...
|
||||
Timer: init start
|
||||
Timer: PM_TMR_BLK discovered from FADT at port 1544
|
||||
Timer: VM mode detected (hypervisor present).
|
||||
Timer: HPET calibration disabled (VM-exit MMIO would poison timing).
|
||||
Timer: WARNING: invariant TSC not present under hypervisor.
|
||||
Timer: continuing in RELATIVE mode (no determinism guarantees).
|
||||
Timer: RDTSCP not present; using RDTSC (less serialized).
|
||||
Timer: CPUID frequency unavailable; trying PM Timer...
|
||||
Timer: trust=1 (0=NONE,1=REL,2=ABS), TSC=2107629803 Hz
|
||||
Timer: init done
|
||||
|
||||
Kernel heap initialized.
|
||||
Heap statistics:
|
||||
Total bytes: 2147483608
|
||||
Free bytes: 2147483608
|
||||
Used bytes: 0
|
||||
Peak bytes: 0
|
||||
Heap base addr: 4294967296
|
||||
Heap end addr: 6442450944
|
||||
|
||||
Heartbeat: init...
|
||||
APIC Timer: calibrating...
|
||||
APIC Timer: apic_hz=1010467601, tick_hz=100, initial_count=10104676
|
||||
APIC Timer: configured (masked, ready to start)
|
||||
Heartbeat: init done
|
||||
Kernel initialization complete.
|
||||
Boot successful!
|
||||
|
||||
System: StarForth v4 (system=v4)
|
||||
StarForth v4: one host node, the F18-derived engine
|
||||
V4: capsule v4:nucleus-64.f18 signature: missing (unsigned)
|
||||
PARITY:V4_NUCLEUS name=v4:nucleus-64.f18 capsule_id=0x3b4a82485b10bfb7 capsule_hash=0x3b4a82485b10bfb7 words=311
|
||||
V4: capsule v4:forth79.4th signature: missing (unsigned)
|
||||
PARITY:V4_CAPSULE name=v4:forth79.4th capsule_id=0x4055641ee17d176b capsule_hash=0x4055641ee17d176b dict_hash=0x6b56e15226ee3719
|
||||
PARITY:V4_POST tests=538 pass=538 fail=0
|
||||
PARITY:V4_SYSTEM word_count=317 dict_hash=0xe5a57f3eb72ff94a
|
||||
PARITY:OK
|
||||
POST: PASSED
|
||||
[32m[HADES][INFO ] [0m[KRELTSC: 0] blk: raw device LBN 2048..3071 (1024 blocks)
|
||||
PCI: init...
|
||||
PCI: ECAM mapped (amd64)
|
||||
virtio-blk: no device on PCI bus 0
|
||||
Artemis: no virtio-blk disk
|
||||
ok>
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user