fix(raspi): the Pi 5's native path turns the MMU and caches on before any C; bounded mailbox; framebuffer address from dma-ranges
boards/BRINGUP.md R2/R3, FABRIC-3 SXXXIX. The entry stub cleans the cache over the image, builds an identity map (the image's GiB Normal, the rest Device) and enables MMU and caches at EL2 (or EL1); rpi5_mmu.c makes the devicetree's RAM Normal and the framebuffer uncached. Mailbox waits give up after one second; the buffer is cleaned around the exchange; the framebuffer address goes through dma-ranges, not a Pi 4 mask. New rpi5-rehearsal target runs the native image on QEMU virt at EL2. It found three more that would each have stopped the board: the PL011 shift (mine, c9519173; the host test asserted it), the GIC address not carried through /soc's ranges (new fdt_reg_address(), checked against the real Pi 5 DTB), and no timer IRQ at EL2 (HCR_EL2.IMO/FMO/AMO). Rehearsal: POST 1052 passed, same parity hash as UEFI. Standard acceptance on three ISAs: POST 1052, hash 0x82f4ae7cb2e2d424. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
co-authored by
Claude Opus 5.5
parent
4da370f492
commit
0e2c60dac3
@@ -146,7 +146,11 @@ int fdt_console_uart(const void* fdt, fdt_uart_t* out)
|
||||
if (!v) return 0;
|
||||
if (compatible_has(v, len, "arm,pl011") || compatible_has(v, len, "arm,pl011-axi"))
|
||||
{
|
||||
out->reg_shift = 0;
|
||||
/* A PL011's registers are 32-bit words: register n is at n << 2.
|
||||
* (0 until 2026-10-14, which put the flag register at +6 instead
|
||||
* of +0x18 -- an alignment fault on Device memory, found
|
||||
* rehearsing the Pi 5's native path; FABRIC-3.md SXXXIX.) */
|
||||
out->reg_shift = 2;
|
||||
out->io_width = 4;
|
||||
out->base = addr;
|
||||
out->kind = FDT_UART_PL011;
|
||||
|
||||
Reference in New Issue
Block a user