Files
LithosAnanake/logs
rajamesandClaude Opus 5.5 c95191736e fix(console): the serial line is found, not assumed -- from the devicetree on a board, COM1 by probe on a PC
Each board has one serial line that is its console, the lowest common
denominator beside the screen and keyboard.  Its address was QEMU's,
fixed: on a Raspberry Pi 5 the aarch64 one is ordinary RAM, written to
with every character printed; on a Milk-V Mars the riscv64 one is the
board's UART with registers four bytes apart, and the UEFI loader would
have waited for ever on its first character; on a PC with no COM1 the
prompt read 0xFF for ever.

console_attach_serial(), called before anything prints: COM1 if a UART
answers there; elsewhere the UART that /chosen/stdout-path names
(fdt_uart.c: alias, path, the address carried up through each bus's
ranges, reg-shift and reg-io-width); with no devicetree, QEMU's.  A
devicetree that names no usable console gives no line, not a guess.  A
line that does not come ready is given up, not waited on.  The riscv64
loader's early serial does the same.

tools/fdt_uart_test.c, run by hand, 19 checks plain and under the
sanitizers: devicetrees shaped like the Mars's, the Pi 5's and QEMU's,
what must find nothing, and a block cut short at every length; and the
Pi 5's real devicetree gives a PL011 at 0x107d001000.

Acceptance, one QEMU at a time: v3 on amd64 (logs/20261013-204436),
aarch64 (-204803) and riscv64 (-205001) to the zuse prompt, no unknown
word, hash 0x08873e0f44b7cb2a on all three as before.  -204600 is an
aarch64 run during which the disk images were restored under it by a
script that had been refused a second QEMU; it passed and is kept, and
was run again.  v4 on the three ISAs (-211149, -211444, -211857): POST
538 of 538, dict_hash 0xe5a57f3eb72ff94a, the typed session unchanged.
The Mars image through OpenSBI and U-Boot in QEMU took its line and its
interrupt controller from the devicetree and passed POST.

Found on the way and not mended (boards/BRINGUP.md 1.6): built with
EMERGENCY_CONSOLE_ENABLED=1 the prompt floods with empty lines.  -210442
shows it; the commit before this does the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-13 21:21:32 -04:00
..
2026-08-02 05:11:24 -04:00
2026-08-02 05:11:24 -04:00
2026-08-02 05:11:24 -04:00
2026-09-01 12:09:20 -04:00
2026-09-01 12:09:20 -04:00

logs/

QEMU acceptance-run history and Tripod smoke-test results.

  • <timestamp>/{amd64,aarch64,riscv64}/ — 255 timestamped three-arch QEMU acceptance run directories, one per invocation of the kernel QEMU acceptance workflow.
  • qemu-screenshot-*.png, qemu-screenshot-*.log, qemu-{amd64,aarch64,riscv64}-*.log, fbtest-console-*.png — loose timestamped QEMU serial captures and framebuffer screenshots from individual manual runs (not part of the timestamped-directory convention above).
  • hermes-tripod-smoke-results.md, hermes-channel-smoke-results.md — captured output from tools/hermes_tripod_smoke.sh and tools/hermes_channel_smoke.sh.
  • hermes-tripod-integration-design.md — design notes for the Tripod integration test.

Note: QEMU_BASELINE.log at the repo root (not in this directory) is the primary kernel regression baseline referenced by .claude/CLAUDE.md; the logs here are supplementary historical captures. See also logs2/ (a separate, flatter QEMU log archive) and experiments/bare_metal/runs/ (DoE-specific run output).