Hera keeps a table of the nodes she has had born, number and place.
KILL ( n -- ): she asks the kernel to remove node n, forgets her own way
to it, and sends GONE about it to every other node in the table. A node
she never had born, herself, or one she has killed already is an error
that says so, and nothing is removed. v3's word and meaning; v3's takes
a name, and a mesh node has a number.
test_host_unit.c, 74 checks: Hera kills node 14 while node 12 is blocked
writing to it, and what 12 then sends there is refused; node 12 waits on
node 13, stuck in a loop and not its neighbour, and the wait ends Node
gone when Hera kills 13; Hera waits on node 12, stuck, and a line typed at
the console ends her wait Interrupted and then kills 12.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Text for a node from its console, arriving while the node waits for an
answer (AWAIT), is kept as any message is; the wait ends in error 21,
Interrupted; and the text is then done as usual. Console text for
another node, passing through a node that is waiting, does not end its
wait.
On the hosted program 5 AWAIT ended the program with "the node stopped".
The boot now reports that the line is waiting, the host reads the next
line and hands it over, which breaks the wait, and then has the kept line
done. The bare-metal host does the same; it is booted in the commit that
follows.
test_host_mesh.c: 76 checks, both widths and the sanitizers. hosted-check
types 5 AWAIT and two more lines: Interrupted, then 3 and 56.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A node that has no room for a message, or no way to pass it on, lets it
go and counts it as before, and now notes that it owes its sender a NACK
(type 4: the node the message was for). It sends what it owes when it
next has nothing else to do. 36 cells of the messages waiting are kept
for NACK and GONE, and nothing is owed for either.
A node sent a NACK counts it in (REFUSED); one waiting for an answer from
that node (AWAIT) stops, with error 19, Message refused. A GONE (type 5)
from a node's centre makes it forget the way to the node named (NO-ROUTE,
new), and ends a wait on it with error 20, Node gone. From anyone else
it is ignored. GONE ( n node -- ) sends one.
test_host_mesh.c, three nodes: text for a node nobody has a way to comes
back to the console, and to a node two away, as a NACK; a waiting sender's
line ends Message refused; a node that is waiting keeps what it has room
for, owes eight refusals, counts the rest, and sends them when its wait is
ended by a GONE from its centre. 70 checks, both widths, sanitizers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A block write the device refuses after the kernel has taken the node's
copy: the node was told "Storage refused" while the kernel's cache kept
the new data, to be read back and perhaps written later. The kernel now
puts its own copy back as it was. Tested with a device whose writes can
be made to fail; it failed first.
POST's runner: a case whose starting state could not be set says so, with
what the node said, where it showed nothing; and a case that ends with
QUIT fails, as it did when the cases were a capsule, where the runner had
taken it for a completed line. Both tests failed first.
The v4 boot says "Artemis: virtio-blk attached" only when the attach
worked.
make -C v4 test, sanitize and hosted-check pass; amd64, aarch64 and
riscv64 boot, POST 538 of 538, dict_hash 0x5f0a949a6fc8ef2b on all six:
logs/20261007-135741, -140004, -140329.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A node writing to a node that was stuck, and was then killed, stayed
blocked for ever: killing a stuck node could cost its neighbours. And on
the hosted and bare-metal products a write to an empty port, 5 7 PORT!,
ended the program with "the node stopped".
Now a node that can take an error, blocked writing to or reading from one
port that nothing is wired to -- nothing ever was, or what was there has
been killed or the wire cut -- has error 18, No one on that port, raised
on it and goes on. A bare node waits as on the fabric; so does a node
whose neighbour is asleep, and one reading "any port".
test_host_unit.c: Hera kills node 14 while node 12 is blocked writing to
it. It failed first: 12 stayed blocked. test_fabric.c: a bare node still
waits. hosted-check types 5 7 PORT! and goes on; it failed first too.
make -C v4 test, sanitize and hosted-check pass; amd64, aarch64 and
riscv64 boot, POST 538 of 538, dict_hash 0x5f0a949a6fc8ef2b on all six:
logs/20261007-121743, -122008, -122337.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Captain Bob was told that v3 leaves the words POST's cases define in the
dictionary, and ruled that v4 should. That was false: v3's run_test_suite
puts the dictionary back after each word's cases (test_common.c:333,
:365). Shown that, he ruled that POST leaves nothing. The boot now
seals the system, runs POST, and has the node do COLD, whose printing is
not shown; PARITY:V4_SYSTEM is the system as sealed.
A case the node does not come back from ends POST there, named, with how
many were not run: it would have stalled the boot for hours, where the
capsule had ended it. The runner's test of it now uses a word that
really never ends.
hosted-check also requires that RS1 and T{ are unknown after boot, and
boots a program whose POST has failing cases (tests/post_cases_fail.c):
PARITY:FAIL, POST: FAILED, no prompt, none of a case's printing shown.
Comments and documents that still named the POST capsule or its two
hooks are brought up to date; NUCLEUS.md 6.3 says what v3 does, with the
lines, and how the wrong ruling came about.
make -C v4 test, sanitize and hosted-check pass; amd64, aarch64 and
riscv64 boot, POST 538 of 538, word_count=314, dict_hash
0x220ab283a504a3b3 on all six: logs/20261007-112638, -112901, -113220.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The boot runs POST with the runner (v4/system/post.c) after the capsules:
it feeds the 538 cases to the node and judges them from outside. A
case's printing no longer reaches the console. What the cases define
stays in the dictionary, as in v3; the system is sealed after POST and
the boot prints PARITY:V4_SYSTEM word_count=N dict_hash=..., as v3 prints
its parity after POST.
Gone: capsules/v4/post79.4th and its blocks 7000 up; the harness words;
(CATCH) and (EMIT-HOOK), with what EMIT and the prompt loop did for them.
The generator runs v3 on the lines as the kernel sends them, without the
capsule's "T| ". One expected result follows from that: >IN.initial
prints 6, not 9.
make -C v4 test, sanitize and hosted-check pass; amd64, aarch64 and
riscv64 boot, POST 538 of 538, word_count=411, dict_hash
0x6fb1d09418b189ee on all six: logs/20261007-105118, -105335, -105651.
T{ is unknown at the prompt; RS1 prints 42 42 before and after COLD. A
scratch build with one expectation changed names the case and ends
PARITY:FAIL, POST: FAILED.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
v4/system/post.c: for each case it empties the node's data stack, sends
DECIMAL FORTH DEFINITIONS, sends the case's lines keeping what the node
prints, reads the stack, and judges: an error exactly if one is expected,
and otherwise the stack and every character printed. A failing case is
named with what it printed and left. Nothing of it is on the node.
Its tests are in test_host_quit.c, on that test's node: 29 checks of cases
that must pass and cases that must fail -- a wrong value, depth, order or
output, an error wanted or unwanted, a case of two lines, depth-only
cases, the starting state, more printing than is kept, and a line that
never comes back. Both widths and the sanitizers.
The boot still runs the capsule; that is the next commit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
mkpost.py writes v4/system/post_cases.c where it wrote the capsule: for
each case its name, its lines, and what it must do -- end in an error, or
leave v3's stack and print v3's output, which is now held in full where
the capsule held its length and a checksum.
The same 538 cases: checked against capsules/v4/post79.4th case by case --
names, lines, stacks, and the length and checksum of each output -- with
no difference. The capsule is still what the boot runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ruled 2026-10-07. BLOCK, BUFFER, UPDATE, SAVE-BUFFERS and EMPTY-BUFFERS
are each one kernel request on port 0, by block number only. The node
has a window of four slots in its memory, as a v3 VM has; the kernel
copies blocks into it, keeps the record of which block is in which slot,
and decides when a block is written (v4/system/blocks.c). The node keeps
no record and gives the kernel no address, so a request cannot overwrite
the node's code. When a block is written stays FORTH-79's: UPDATE marks
it. When the chain of devices changes the slots are let go, as in v3.
The window is 512 cells more than the two buffers were; the dictionary
space ends that much lower, at 13824.
MESH.md 8.5 had said, from the review, that a v3 VM's BLOCK is the
kernel's buffer. It is not, and the section now says what was reported,
what v3 does, and what was ruled.
make -C v4 test, sanitize and hosted-check pass; amd64, aarch64 and
riscv64 boot, POST 538 of 538, the same hashes on all six:
logs/20261007-092835, -093112, -093456.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A block request with fewer than two values on the stack is refused; it
had acted on whatever the stack ring held and stopped the node.
Bare metal: when the kernel's chain takes the place of POST's block RAM
the node's two buffers are emptied, so it no longer holds POST's copy of
a block; and the chain's fast RAM is cleared, so a node cannot read what
was in the kernel's heap.
blocks.c is built with each test under that test's own warnings and
sanitizers; it had been left out of both. The hosted link cleans its
object directory first: it had linked the withdrawn store_v3.o left there
from the day before.
node.h and DECOMPOSITION.md D-19 no longer describe the message device or
the four registers as current. MESH.md 8.5 records two findings for
ruling: a node's own copy of a block, and a block read over a node's code.
From a clean build: make -C v4 test, sanitize and hosted-check pass;
amd64, aarch64 and riscv64 boot, POST 538 of 538, same hashes, blocks 1
and 2047 clean at the prompt: logs/20261007-085017, -085254, -085636.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MESH.md step 6 as built, what is not as intended yet, and step 6b for
POST becoming the kernel's. README and V3-PARITY.md brought up to date.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A block is a kernel request, as ENGINE.md 3.3 has it: the node puts the
block's number and the address of 256 cells on its stack and writes the
request to port 0, and the kernel leaves the status there. The requests
are -1, read, and -2, write, the same for every node. v4/system/blocks.c
serves them from the kernel's block subsystem, which is v3's. The four
storage registers are gone from the engine.
The device that spoke block messages (4a505a15) is withdrawn with its
test and its message types: Captain Bob ruled on 2026-10-07 that it, a
node's own drive, and nodes with no storage had left the OS as designed
(docs/v4.0.0/MESH.md 8.5).
Hera no longer sends POST to the nodes she births: POST is the kernel's,
once. Every node has its kernel on port 0; it serves a node's blocks and,
for Hera alone, her requests for nodes and capsules.
Bare metal: the node boots and is POSTed against POST's own block RAM,
and the kernel's chain -- fast RAM, the ramdrive, the virtio disk -- is
set up after POST and before the prompt, as on the v3 path. The disk is
read and not written: nothing in v4 yet gives the owner's word that it
may be formatted. A hosted program has the chain's fast RAM, as hosted
v3 has with no disk. Error 17 is Storage refused.
make -C v4 test and sanitize pass at both widths; hosted-check passes on
three ISAs; amd64, aarch64 and riscv64 boot, POST 538 of 538, with the
typed session: logs/20261007-081603, -081839, -082226. The hashes are
the same on all six.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
What is on a storage port (v4/system/storage.c): it takes Block read,
Block write and Block data and answers Block data or Block done. It
holds a view of a common chain, a private chain, or both; private block k
is number 2^32 - 1 - k. Behind it is v3's block subsystem, reached
through v4/system/store_v3.c, the one v4 file that includes v3's headers.
v3's block code links here with its two device back ends, its log and
its clock, and nothing else of v3.
v4/tests/test_store.c: 36 checks at 64 bits, 35 at 32, and under the
sanitizers. docs/v4.0.0/MESH.md 8.3, 8.4.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MESH.md step 5, in the fabric under test; the products are still one
node each until steps 8 and 9.
manage.c: what Hera asks of whoever holds the fabric, eleven requests by
KERNEL-WORD -- NODE-ME -BORN -WIRE -UNWIRE -SLEEP -WAKE -KILL -PARITY and
CAPSULE-OPEN -CELL -LINE. Nucleus: PORT!, SEND-ON, AWAIT, (SEAL).
capsules/v4/hera.4th: BIRTH and UNIT, the unit rule in FORTH and nowhere
else. The dictionary hash moves to the engine (v4_image_dict_hash).
test_host_unit.c, 34 checks, 64-bit: Hera is born empty, takes the
nucleus through her port, FORTH-79, POST and her capsule; 10 UNIT; four
nodes are born, each takes the nucleus and FORTH-79 through its port from
Hera and passes POST 538/538; four parities, one dictionary hash; they
talk, and a message between two corners not wired goes by Hera.
All v4 tests at both widths and under ASan+UBSan. hosted-check on three
ISAs. Bare metal: logs/20261006-143934 (amd64), -144204 (aarch64),
-144601 (riscv64).
Open, recorded in MESH.md: not run at 32 bits; a node that never answers
leaves Hera waiting; the capsules are read from files in the test, not
from the baked directory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MESH.md step 4, the fault found there, as ruled (section 7a): a node
writes only to a neighbour that is reading, keeps what it takes in
meanwhile, and loses and counts what it has no room for.
Engine: two more addresses after a node's ports -- which ports have a
neighbour waiting to write to it, which to read from it. Nucleus: (GATE)
before every message; the messages waiting, a ring of 400 cells, dealt
with when the node is idle. Of two neighbours the lower number may wait
to write (ruled after it was built); NEIGHBOUR tells a node who is on
each port.
test_host_mesh.c, 44 checks: the case that stopped the nodes passes; six
messages from each node to each at once all arrive; 800 at once, the
nodes come to rest and every message arrived or was counted (287 arrived,
714 of all kinds let go). test_fabric.c: the two looks. Both widths,
ASan+UBSan.
POST: twelve cases handed HERE, a cell address on v4, to words that take
a byte address, and so wrote into or read from the nucleus's code at cell
HERE/4. Ruled: left out, marked OPEN, until HERE and the byte words are
made to agree as its own step. POST is 538 cases.
hosted-check on three ISAs, 538/538. Bare metal: logs/20261006-134817
(amd64), -135044 (aarch64), -135440 (riscv64).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MESH.md step 4. Each node has a table of destinations and the port toward
each, and a port for everything else (ROUTE, DEFAULT-ROUTE, NO-ROUTES). A
message not for this node is passed on whole; one with nowhere to go is
dropped and counted. What text prints and how it ended go back to the node
it came from by the same table. SEND sends text to another node.
test_host_mesh.c: three StarForth nodes in a row behind a console, 28
checks at both widths and under ASan+UBSan. hosted-check on three ISAs.
Bare metal: logs/20261006-115225 (amd64), -115501 (aarch64), -115849
(riscv64).
NOT DONE. Two neighbours that write to each other at once wait for ever:
a write blocks until the neighbour reads, and a node that is writing is
not reading. The last check in test_host_mesh.c shows it (KNOWN FAULT).
MESH.md section 7a sets out the ways out; none is chosen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MESH.md step 3. The ports are the transport; the message is what is
transported: to, from, type, heat and TTL, ACL tag, sequence, length, then
text four characters to a word.
- quit.v4: a node with nothing to do is blocked reading "any port"; text
for it is interpreted; (FINISH) sends what it printed and then how the
text ended, and it waits again
- core.v4: EMIT keeps what is printed, (FLUSH-OUT) and (HDR) send it to the
sender on the port the message came on. EMIT still needs one free data
cell and no more; it works on the return stack and in A and B
- message.h/.c: the same format for whatever is on a port and is not a node
- boot.c: the boot is the node's console on port 1 and its kernel on port 0
- the prompt tests are a console that speaks messages
- gone: v4_line_begin, v4_line_done, v4_line_status; writing a node's input
buffer and setting its P from outside; any use of CONSOLE-TX
Verified: make -C v4 test (test_host_quit.c 1283 checks, the full-stack
figures unchanged) and make -C v4 sanitize pass; hosted-check passes on
three ISAs with POST 550 of 550; clean qemu with STARFORTH_V4=1 passes POST
and answers lines typed at each prompt on amd64, aarch64 and riscv64
(logs/20261006-110551, -111621, -111341). -110837 is an aarch64 run ended
by the test wrapper's limit while still in UEFI firmware; it shows nothing
about v4.
Not done: KEY, EXPECT and QUERY still read the console's input registers;
a message not for this node is let go (step 4).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MESH.md step 2. A capsule of F18 code is the words a neighbour writes to a
node's port: for each stretch of memory, "@p a! @p push", the address and
count, "@p !+ unext" and the words; then a jump to the start. A node born
empty executes that from its port, so it needs nothing in it beforehand.
- capsule.h/.c: v4_capsule_write, any node's memory as such a capsule
- mkimage writes the nucleus so, to capsules/v4/nucleus-64.f18, and the
addresses a host needs as a C file; the memory image is no longer linked
into either product
- mkcapsule is unchanged: the nucleus capsule is a built file kept under
capsules/, as BLOCK_MAP.md is, and is baked, hashed and signed with the
rest
- boot: the node is born empty (v4_image_born); the nucleus capsule is
found, its hash and signature checked, and given to the node a word at a
time as it reads its port; PARITY:V4_NUCLEUS carries its name and hash
Verified: test_fabric.c (59 checks, both widths, and under ASan and UBSan):
a memory with a programme and scattered words arrives word for word in an
empty node and runs. The nucleus capsule rebuilds byte for byte.
hosted-check passes on three ISAs; clean qemu with STARFORTH_V4=1 on amd64,
aarch64 and riscv64 takes the nucleus in, passes POST (550 of 550) and
answers lines typed at each prompt (logs/20261006-102421, -102706,
-103048).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
MESH.md step 1, in the engine, which knows nothing of StarForth or of any
kernel.
- node: V4_PORTS ports (8), a build parameter; "any port" and the port the
last such read came from; a read blocks until the neighbour writes, as a
write blocks until the neighbour reads; v4_node_born: empty, P at "any
port"
- exec: a fetch from a port -- @ @b @+ @p, or of an instruction word when P
is a port -- waits for a word; a node executes what arrives at a port
without advancing P; a blocked node goes on from the slot it stopped at
- fabric: the nodes there are and the table of how their ports are wired,
both changed while the nodes run; devices on a port; asleep and awake; a
step is every unblocked node executing one instruction word, then every
write with a reader waiting being handed over
- DECOMPOSITION.md section 6: four named ports withdrawn for V4_PORTS
numbered ones and wiring as data, as ruled
Verified: tests/test_fabric.c, 53 checks at both widths: two nodes exchange
words; an empty node is filled through its port by a device, and by another
node, and runs what it was sent; a word is passed on by a node in between;
a waiting node executes nothing; the wiring is changed while they run; a
node is put to sleep, woken and removed while looping; a node is born while
others run; the fabric is given more room. make -C v4 test and make -C v4
sanitize pass. The single-node products are unchanged: hosted-check on
three ISAs, and clean qemu with STARFORTH_V4=1 on amd64, aarch64 and
riscv64 with lines typed at each prompt (logs/20261006-074907, -075150,
-075532).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ENGINE.md 3b, the node's side of ruling A (a word's code is the node's, its
accounts the kernel's).
- dict.v4, system.v4: (WORD-DEFINED) ( xt -- ) is run when an entry is
made, (WORD-FORGOTTEN) ( w -- ) when FORGET or COLD removes entries; with
0 there no one is told, as on the hosted product
- test_host_quit.c: a kernel that keeps the list of words and is checked to
hold exactly the node's dictionary after definitions, a vocabulary, an
abandoned definition, FORGET, a refused FORGET and COLD; KERNEL-WORD
called from the prompt and from a definition
Fixed, found while writing that test: since the capsules moved from build
time to boot time (294e6946), what COLD returns to and FORGET protects was
still the nucleus alone, so COLD lost U*, U/MOD and BYE and FORGET U* was
allowed. The boot now seals the system when it has loaded it
(v4_image_seal), and hosted-check checks COLD, the capsule word after it,
the refused FORGET and BYE.
Verified: make -C v4 test passes at both widths (1283 checks in
test_host_quit.c); hosted-check passes on three ISAs; clean qemu with
STARFORTH_V4=1 on amd64, aarch64 and riscv64 passes POST, and COLD, U*
after it, FORGET U* (refused), an unserved kernel word and BYE typed at
each prompt are answered correctly (logs/20261005-193045, -193307, -193636).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
ENGINE.md step 2, the carrier. Ruled 2026-10-05 (V3-PARITY.md 1i), on
DECOMPOSITION.md section 6: a write to a port blocks until the neighbour
reads.
- node: v4_node_port_attach, v4_node_port_served; a store to the port keeps
the value as the request and blocks the node
- exec: a blocked node executes nothing; served, it goes on from the opcode
after the store, in the same instruction word; a fault meanwhile abandons
the rest of the word
- compile.v4: n KERNEL-WORD name makes a word whose body writes n to the
port; its arguments and results are on the data stack
- boot: the kernel's words are made by handing the node text, and requests
are served between the node's opcodes; one no one serves is error 12
- BYE, the first kernel word: hosted it leaves the program, as hosted v3;
on the lone node it is v3's cold restart
- ENGINE.md 3a: multiuser, multitasking, preemptive and cooperative, and
what that asks of the engine
Verified: make -C v4 test passes at both widths, with tests/test_port.c;
hosted-check passes on three ISAs; clean qemu with STARFORTH_V4=1 on amd64,
aarch64 and riscv64 passes POST with the same hashes as hosted, and a
kernel word no one serves and BYE typed at each prompt are answered
(logs/20261005-185506, -185734, -190101; -185234 is an amd64 run in which
those two lines were not typed).
Not done: v3's own C functions serving a node.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A v4 node no longer reads its own command line or prints a prompt. Its
host puts a line of text in the node's input buffer and starts it at
(LINE); the node interprets it and stops at (IDLE), leaving in
(LINE-STATUS) how it ended: completed, an error, or QUIT. The host says
" ok" or " ERROR" and prompts, as the kernel's REPL does for a v3 VM. A
line may be 1024 characters, a block, as v3's. Ruled 2026-10-05
(V3-PARITY.md 1b); design ENGINE.md 3.1.
- quit.v4: (REPL), the node's prompt loop, is gone; (LINE) (IDLE) (DONE)
- image.h/.c: v4_line_begin, v4_line_done, v4_line_status; the node is
idle at switch-on
- boot.c: v4_boot_line, the one loop the hosted binary, the kernel and the
capsule loader hand a line with; the code that took " ok" and the prompt
back out of the node's output is gone
- hosted.c, sk_v4.c: the prompt and the line editing are the host's
- test_host_quit.c: the tests are the node's host; two tests of the old
80-character prompt line now test a whole line, 1024 and 1025 characters
Verified: make -C v4 test passes at both widths; hosted-check passes on
three ISAs; clean qemu with STARFORTH_V4=1 on amd64, aarch64 and riscv64
passes POST (550 of 550) with the same hashes as hosted, and three lines
typed at each bare-metal prompt through the serial port are answered
correctly (logs/20261005-180922, -181152, -181541).
Still the lone node: kernel_main.c starts it before the fleet tables.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The boot is now nucleus, forth79.4th, POST, prompt, on both products.
- forth79.4th: U* and U/MOD, the capsule's first colon definitions. They
are in the FORTH-79 Required Word Set and neither v3 nor v4 had them.
- post79.4th: 550 cases, 126 of the 130 required words. 443 are v3's with
v3's result. The rest follow three rulings (2026-10-05): address-
dependent cases are checked for count, not value; where v3 departs from
FORTH-79 the standard's result is expected; words v3 has no case for get
cases written by hand. v4/tools/post79_rules.py holds each exception
with its reason and docs/v4.0.0/POST79.md lists them all.
- every case starts from an empty stack, DECIMAL and FORTH DEFINITIONS
- the boot requires POST's tally line with fail=0
Verified: tests=550 pass=550 fail=0 and identical PARITY lines on hosted
amd64, aarch64 and riscv64 (make -C v4 hosted-check) and on bare metal,
clean qemu with STARFORTH_V4=1, on the same three (logs/20261005-1619xx,
-1621xx, -1625xx). A U/MOD broken on purpose fails five cases and stops
the boot. make -C v4 test passes.
Not shown: all words but those two are still assembled, so POST has so far
tested the assembled words. Nothing was typed at a bare-metal prompt.
Open: PAD 42 OVER ! faults on v4 (D-1).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
capsules/v4/post79.4th: 537 of v3's POST cases for the FORTH-79 Required
Word Set, each carrying what the hosted v3 binary did with the same line
(error or not, the stack, the length and checksum of what it printed).
Written by v4/tools/mkpost.py. The harness is FORTH-79 plus the two
nucleus hooks. docs/v4.0.0/NUCLEUS.md section 6.
- NODE-ERROR has a FORTH name: how a definition in FORTH raises an error
- the boot passes POST only on seeing its tally line with fail=0
- POST is not in the boot yet (V4_POST_AT_BOOT=0); make -C v4 post runs it
Result: tests=537 pass=439 fail=98. The 98 are not yet sorted into v4
defects and differences needing a ruling; v4/README.md has a first reading.
Verified: make -C v4 test passes; hosted-check passes on three ISAs; clean
qemu with STARFORTH_V4=1 on amd64, aarch64 and riscv64 reaches ok> with the
same hashes as hosted (logs/20261005-1601xx..1604xx). Nothing was typed at
a bare-metal prompt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(CATCH): while it is not zero, a line that ends in an error sets it to -1
and ends " ok" instead of " ERROR". (EMIT-HOOK): the xt of a word that is
given each character EMIT would send to the console. The prompt loop sets
(EMIT-HOOK) to 0 at the end of every line. docs/v4.0.0/NUCLEUS.md 6.3,
amended: it said one nucleus word would do.
Verified: make -C v4 test passes at both widths; by hand at the hosted
prompt, an unknown word and a division by zero are caught, the output hook
receives every character, and an uncaught error still says ERROR.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
clean qemu with STARFORTH_V4=1 on amd64, aarch64 and riscv64, one at a
time. Each prints the same PARITY:V4_NUCLEUS and PARITY:V4_CAPSULE lines as
the three hosted binaries (image_hash 0x60b74e4f87adb0ac, dict_hash
0x0baed67626b4fac4), then PARITY:OK and ok>.
Each run was ended once the prompt was in the log. Nothing was typed at a
bare-metal prompt. The capsules were unsigned: no signing key on this
machine. The v3 boot (STARFORTH_V4=0) was not re-run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One boot, v4/system/boot.c, for both products: it starts the nucleus image,
finds each capsule in the baked capsule directory, recomputes its hash,
checks its signature, gives its blocks to the node a line at a time, and
prints PARITY:V4_NUCLEUS, PARITY:V4_CAPSULE and PARITY:OK before the prompt.
A line the node does not accept ends the boot with the capsule, block and
line named. docs/v4.0.0/NUCLEUS.md.
- hosted Linux product for amd64, aarch64 and riscv64 (make -C v4 hosted);
make -C v4 hosted-check boots all three and requires identical output
- the kernel's v4 entry (STARFORTH_V4=1) calls the same boot
- capsules/v4/forth79.4th, block 6000: no definitions yet
- mkimage builds the nucleus only; no FORTH source is compiled at build time
- capsule_blocks.c: the Block-header parse, free of any VM, for every loader
Verified: make -C v4 test passes; hosted-check passes on the three ISAs with
the same hashes; the kernel compiles with STARFORTH_V4=1 on the three.
Not verified: no bare-metal boot of v4 has been run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Each entry's flags cell also holds v3's four fields: denied, pinned,
mode and a 16-bit TTL.
- compile.v4: INTERPRET checks every word it is about to execute or
compile -- recheck at TTL 0, else count down; a denied word is refused
with v3's line, the stack emptied and the line ended.
- capsule/acl.v4: ACL-MODE@ ACL-MODE! ACL-TTL@ ACL-TTL! ACL-ALLOW@
ACL-ALLOW! ACL-PINNED? ACL-PIN ACL-INHERIT ACL-INIT-PRIMITIVES ACL-HEAT@
ACL-WORD-ID, and ACL-HOOK.
- capsule/ACL.fth: v3's ACL.4th as FORTH source the node compiles; loading
it switches access control on.
- v3 checks every execution, inside definitions too. v4's code is native,
so it checks a word when it is compiled as well as when interpreted; a
call compiled while the word was allowed is not checked again.
DECOMPOSITION.md 5.20 says so.
- ACL-HEAT@ is 0 until heat is readable (D-6).
- tests/test_host_quit.c: seven transcripts of the v3 binary; the policy
file loaded and exercised; COLD.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- capsule/log.v4: the level constants LOG-ERROR .. LOG-DEBUG, LOG-LEVEL!
and LOG-LEVEL@, LOG-ERROR" .. LOG-DEBUG" and LOG-ERROR-STR ..
LOG-DEBUG-STR. A message is printed if its level is at or below
LOG-LEVEL, as v3's line -- colour, level, text -- without the time of
day, which a node has not got.
- LOG-xxx" compiles like ." : the level, a call to (LOG"), the text. SEE
shows it as text. COLD puts LOG-LEVEL back to LOG-INFO.
- tests/test_host_quit.c: ten transcripts of the v3 binary, every level
at every setting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- capsule/tools.fth: SEE as FORTH source the node compiles itself. v4
code is native, so it shows each instruction word of a definition: the
opcodes by name, literals' values, the names of the words called or
jumped to, and text compiled by ." S" and ABORT" as text. A data word
shows what it holds; an immediate word says so.
- quit.v4: the three string run-time words get names, compile-only, so
that SEE can tell text from code.
- tests/test_host_quit.c: definitions with literals, text, IF and loops;
the capsule's own words; SEE shown by SEE.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- capsule/editor.fth: the block editor as FORTH source, which the node
compiles itself. It is a vocabulary, EDITOR, used at the ordinary
prompt: n EDIT, then L N B T P E D S H R I WIPE DONE. v3's EDIT, a
shell of its own, is not carried over (ruled 2026-10-05); v3's L S and
SHOW are kept in FORTH as they were, with COPY.
- system.v4: COLD (the system as the loader left it), WARM, PAGE,
VERSION, 79-STANDARD (FORTH-79: silent), and DEFER IS DEFER@ as v3.
- input.v4: where words are split at blanks a zero byte reads as a blank,
so a block never written, or filled a line at a time, loads cleanly.
- tests/test_host_quit.c: the editor's source fed to the prompt line by
line, every command on empty and full screens, what reaches storage;
the system words; deferred words.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- The golden model's host node gets a block storage device: four
memory-mapped registers (number, address, command, status), 1024-byte
blocks as 256 cells. tests/test_node.c.
- capsule/blocks.v4: BLOCK BUFFER UPDATE SAVE-BUFFERS EMPTY-BUFFERS LIST
LOAD SCR BLK (FORTH-79) and v3's FLUSH THRU and -->, over two buffers.
- The text being interpreted is at the address in (SRC), which QUERY makes
the terminal's buffer and LOAD a block's; LOAD saves and restores it, so
blocks nest and the rest of LOAD's line runs afterwards. WORD makes
sure a loading block is still in a buffer before it reads.
- In a block, \ skips to the next 64-character line.
- A block number that does not exist, and --> at the terminal, are errors
with messages (D-18).
- tests/test_host_quit.c: ten transcripts of the v3 binary; nesting three
deep on two buffers; what reaches the device and when.
v3's LOAD drops the rest of its line, and v3 has no BLK.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- VOCABULARY DEFINITIONS CONTEXT CURRENT FORTH, and v3's ORDER. A name is
looked up in the CONTEXT vocabulary and then in FORTH; a new entry goes
into the CURRENT vocabulary; : makes the CURRENT vocabulary CONTEXT;
FORTH is immediate.
- WORDS lists the CONTEXT vocabulary. FORGET takes what was defined later
out of every vocabulary, and a vocabulary that goes gives way to FORTH.
- v3's vocabularies separate nothing: a word defined in one is found from
every other, and one redefined in a vocabulary replaces FORTH's for good.
- tests/test_host_quit.c: isolation, chaining to FORTH, two vocabularies
with the same names, FORGET across them; and DUMP is now checked to put
BASE back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- capsule/qmath.v4: Q.FROM-INT Q.TO-INT Q.1 Q.0 Q.SCALE Q.+ Q.- Q.* Q./
Q.ABS Q.NEG Q.= Q.< Q.> Q.0= Q.MAX Q.MIN Q.EXP Q.SQRT Q.LOG Q.SIN Q.COS
Q.PRINT -- the definitions test_foundation.c executes on the mesh node,
now in the host node's vocabulary.
- numout.v4: DUMP.
- Q./ by zero, and Q.SQRT and Q.LOG outside their domain, leave the
result D-11 and D-12 give and then raise an error (D-18): "Division by
zero", "Argument out of range". v3 returns 0 silently.
- tests/test_host_quit.c: 122 results printed by Q.PRINT are transcripts
of the v3 binary, the same at both cell widths; signed values, the
errors and DUMP's layout besides.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- compile.v4: CASE OF ENDOF ENDCASE, as v3 (they nest; a word out of
place is a control structure mismatch); ['] and [LITERAL].
- quit.v4: S" and its run-time word; at the prompt the text is copied to
PAD.
- capsule/system.v4: WORDS and VLIST; FORGET (FORTH-79), which gives the
space back and will not remove a word below FENCE -- the capsule's own
words -- where v3's FORGET DUP succeeds.
- tests/test_host_quit.c: ten more transcripts of the v3 binary, and
nesting, the fence and the listing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
capsule/words.v4: the stack, comparison, shift, double, mixed and string
words whose definitions DECOMPOSITION.md already gives and the mesh-node
tests execute, now in the host node's vocabulary:
2SWAP 2OVER 2ROT 2>R 2R> 2R@ 2@ 2! -! 0<> 0> <> <= >= U< U> ABS MAX MIN
WITHIN LSHIFT RSHIFT D- DABS D0= D0< D= D2* D2/ D< DMAX DMIN M+ M-
CMOVE> MOVE FILL ERASE BLANK -TRAILING COMPARE SEARCH SCAN SKIP
?TERMINAL TRUE FALSE INVERT NOP
- A shift count that is negative or as large as the cell is an error, as
in v3 (code 9, "Shift count out of range").
- tests/test_host_quit.c: 36 sessions from the prompt that are
transcripts of the v3 binary, and the cases where v4 keeps the standard
(MOVE in cells; M+ and M- with the double low cell first).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ruled 2026-10-04: guard all errors. The errors that set NODE-ERROR and
let the line run on now stop it at once, with a message.
- A store of a non-zero code to NODE-ERROR is a trap, a sixth kind of
fault: nothing after it executes, the return stack is emptied, and the
data stack is left as the word left it. Not attached, NODE-ERROR is
plain memory, as the tests below the prompt use it.
- The capsule's words store a code where they stored -1, and the prompt's
(RAISED) prints its message: Negative count, Not a number, Number too
long, Not a character, Dictionary full, Name missing, Control structure
mismatch, Control structures too deep.
- ' and COMPILE and [COMPILE] of a word that is not there say
UNKNOWN WORD: 'xxx', as the interpreter does.
- tests: the trap in test_exec.c; every message from the prompt, with the
rest of the line not run and the stack kept, in test_host_quit.c.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- capsule/numout.v4: <# # #S HOLD SIGN #>, . .R U. U.R D. D.R, ?, SPACES,
DECIMAL HEX OCTAL -- the definitions DECOMPOSITION.md 5.8 gives and the
mesh-node tests execute, now words of the host node's vocabulary.
- .S, which D-16 makes possible again: as v3, the depth, then every value
from the deepest, then a new line. It needs six cells of the stack
free.
- tests/test_host_quit.c: printed from the prompt, with 14 more sessions
that are transcripts of the v3 binary, and the ends of the number range
at each cell width.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With the stacks counted and guarded (D-16) their size is a parameter of
the node. The host node, which runs the interpreter and the compiler
under the user's programme, gets 32 values and 32 return entries; a mesh
node keeps the F18's 10 and 9. Nothing else about the mechanism or any
word's definition changes.
- stack.h: V4_DATA_RING and V4_RET_RING are build parameters; the
Makefile sets them for the host-node tests.
- tests/test_host_quit.c no longer assumes a size: it fills the stacks to
whatever they are, and takes every exit with the return stack full.
- Measured on the host node now: 28 values on a line, 29 waiting between
lines, words 31 deep from the prompt.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ruled 2026-10-04, revising D-2: stack overflow and underflow are errors
that are shown and return to the prompt, not silent wrap-around.
- Each stack counts what it holds. Before every opcode the executor
checks that the stacks hold what it takes and have room for what it
leaves; otherwise the opcode does nothing and the node faults, as for a
bad address, to that kind's handler. Every fault empties both stacks.
- The fault handler is now a table of five jumps: address, data overflow,
data underflow, return overflow, return underflow. The host node says
"Stack overflow", "Stack underflow", "Return stack overflow",
"Return stack underflow", then ERROR and the prompt.
- Two registers, DSTACK-DEPTH and RSTACK-DEPTH: a fetch reads the depth,
a store empties the stack. QUIT, ABORT and the error exits empty the
return stack before they call anything; ABORT empties the data stack.
- capsule/forth.v4: DEPTH, PICK and ROLL, to FORTH-79 (counting from
one). PICK and ROLL set the values above the one wanted aside in
memory, and work with the stack full.
- Division by zero now takes its operands off the stack, as v3 does.
- A colon with no room for its entry abandons the line.
- tests: every opcode at every depth of both stacks; the faults, the
registers and the three words from the prompt.
The sizes are unchanged: ten values, nine return entries.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ruled 2026-10-04: guarded, an error shown, back to the prompt.
- capsule/forth.v4: / MOD /MOD */ */MOD M/MOD, M* and S>D join the
vocabulary. Each dividing word tests its divisor first; zero prints
v3's message ("/: Division by zero"), ends an open definition, prints
ERROR and returns to the prompt from however deep.
- SM/REM here has UM/MOD written into it and keeps its signs in memory,
and */MOD has M* written in, so that division can be used inside words
that other words call: / from four words deep, */MOD from three.
- forth.v4 now loads after quit.v4, which the guard leaves through.
- tests: v3 transcripts for each message; /MOD, /, MOD and */MOD against
C on every pair of edge values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ruled 2026-10-04: guarded, an error shown, back to the prompt.
- The executor checks every address a programme uses (P, A, B) before
using it. Outside memory the opcode does nothing, the rest of its word
is not executed, and P becomes the node's fault handler; a node with no
handler stops. v4_node_load/store never index outside memory.
- capsule/quit.v4: (FAULT), the host node's handler, prints
"Address out of range", ends an open definition, prints ERROR and
returns to the prompt.
- tests: every memory opcode and P in test_exec.c; from the prompt, from
inside nested words and loops, in test_host_quit.c.
This closes the hole node.h described: a wild address used to index the
model's own memory gigabytes out of bounds.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Layer 5 of the compiler capsule. The host node is now started at QUIT and
left running: it prompts, reads a line from its console with QUERY,
interprets it, says " ok" or " ERROR", and goes round again.
- capsule/quit.v4: QUIT and ABORT (FORTH-79), ABORT" and (ABORT") as v3 has
them, ." and (.") (FORTH-79). Text is compiled as a counted string after
the call; the run-time word returns to the cell after it.
- INTERPRET prints v3's messages before abandoning a line:
UNKNOWN WORD: 'xxx' and xxx: compile-only.
- core.v4: CR SPACE COUNT TYPE, as DECOMPOSITION.md gives them.
- input.v4: WORD split so that (PARSE) can take text without skipping
leading delimiters (." " is an empty string); EXPECT keeps its place in
memory, so six values may wait on the stack while a line is typed.
- tests/test_host_quit.c: the node is fed characters and its output read;
16 sessions are transcripts of the v3 binary.
QUIT stops the line from inside any word and says nothing; v3's goes on
with the line and cannot be compiled. v3's compiled ABORT" crashes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Measured, compiling a DO loop left one return entry spare under
INTERPRET and a defining word called from inside another word
overflowed the nine-entry return stack (D-2); the prompt loop will take
one more.
C@ and C! shift without a loop. The code generator shifts each opcode
into the word being built, so nothing is placed by a counted shift, and
the address masks come from a table. The dictionary search, the
in-liner, the end of a loop and the making of a data word are each one
word reached by a jump.
Every kind of line now leaves at least three return entries spare while
it compiles; a word run from the interpreter has six; and CREATE ...
DOES> works from the prompt, from a word, and from a word that calls
that.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The fourth layer of the compiler capsule. compile.v4: INTERPRET's
loop, STATE [ ] : ; EXIT IMMEDIATE LITERAL COMPILE [COMPILE] ' EXECUTE,
CREATE VARIABLE CONSTANT DOES>, and IF ELSE THEN BEGIN UNTIL AGAIN
WHILE REPEAT DO ?DO LOOP +LOOP on a control-flow stack in memory.
forth.v4: the first words of the vocabulary, the in-line ones.
FORTH source now goes in and running code comes out. 49 programmes
were run through the v3 binary and through this; every result agrees,
bar COMPILE, which v3 cannot run. The code laid down for each control
structure is word for word the expansion DECOMPOSITION.md gives.
A line may have six values on the stack while it is interpreted, and
words called from the interpreter may nest eight deep.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
WORD, the dictionary words and the code generator run underneath
whatever the user has on the stacks, which are ten and nine deep (D-2).
Measured, they used five to seven data cells of their own, leaving a
line about three. Each now keeps what it works on in its file's
scratch cells and has at most three cells on the data stack; , calls
nothing; and the longest chains of calls are shorter.
The public words of core.v4, input.v4 and dict.v4 get dictionary
headers. NUMBER is split so the interpreter can have a flag instead of
NODE-ERROR. The host-node tests share one memory map, host_map.h.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
&NAME is the address of a word as a literal; CONST+N is a loader
constant plus an offset as one literal, so that a capsule file can
address the cells of its scratch area without adding at run time.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
'header NAME [flags]' in front of a word gives it a dictionary entry in
the layout capsule/dict.v4 uses, linked to the header before it, so the
words of a capsule are in the dictionary as soon as it is assembled.
The name is taken as it stands (it may be ( or + or ;) and the
assembler's own name for the code may differ.
Tested in the assembler's own test, and by FIND and the field words
running over assembler-made entries beside ones (HEADER) made.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The third layer of the compiler capsule, v4/capsule/codegen.v4: opcodes,
literals and branches packed into instruction words at HERE, by the
rules of sections 1.2 and 2. (OP,) (LIT,) (LABEL) (BRANCH,) (JUMP,)
(CALL,) (BRANCH>) (RESOLVE) (FLUSH) (CG-RESET).
Tested by laying the same programmes down with the text assembler on
one node and with the code generator, running, on another, and
comparing memory word for word: every opcode, literals and branches in
every slot position, and 600 random programmes. What it lays down is
then run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
