fix(usb): the xHCI controller is found by class on any bus, sized, taken from the firmware, and 64-byte contexts laid out

boards/BRINGUP.md A1, FABRIC-3 SXL.  It was matched by QEMU's own IDs on
bus 0 alone, so no real board's was found.  Now pci_find_class() reads
every bus/slot/function; pci_bar_size() sizes BAR0; the USB Legacy Support
capability hands the controller over from the BIOS, SMIs off; CSZ=1
contexts are placed 64 bytes apart instead of refused.  XHCI_QEMU_ARGS
lets QEMU place the controller as real hardware does.

Test first: an NEC controller behind a PCIe root port -- no attach before,
Zuse minted after, on all three ISAs.  Standard acceptance unchanged; five
hot-plugged identities attach.  Not rehearsable: firmware handoff, CSZ=1.
Still open: only the first controller found is used.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
rajames
2026-10-14 13:30:50 -04:00
co-authored by Claude Opus 5.5
parent 0e2c60dac3
commit 080b7012ba
24 changed files with 72536 additions and 67 deletions
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff
File diff suppressed because it is too large Load Diff